T-Metro 8001

Carrier Ethernet & MPLS 10GE Service Aggregation Platform


T-Metro 8001 is a next generation 10GE service aggregation solution for mobile backhaul and Ethernet business services, offering a breakthrough in Carrier Ethernet and multiprotocol label switching (MPLS)  differentiated services.
Download T-Metro 8001 DatasheetA4 PDF  US Letter PDF  

Telco Systems’ T-Metro 8001 is a next generation high density service aggregation platform that provides Carrier Ethernet over both MPLS and Ethernet transport technologies, and is integrated with massive service scalability, carrier class resiliency, and an industry-leading feature set that supports Hierarchical QoS (HQoS), operations administration and management (OAM) capabilities. This best-in class service switch allows carriers to offer cloud-based, business Ethernet and mobile backhaul services to the edge. With 200GE capacity in a compact 1RU chassis, the T-Metro 8001 provides industry-leading throughput, port density, management and resiliency. Enabling a wide variety of services and an easy migration to a converged service environment, the T-Metro 8001 is the platform of choice to enable wide-scale Carrier Ethernet adoption, implementation, and transformation.

The T-Metro 8001 is designed for service providers who need the reliability of the traditional SONET/SDH quality of service and the flexibility to deliver multiple services at 1GE/10GE port rates in a metro Ethernet environment. This carrier-class device offers a full MPLS provider edge (PE) solution with integrated advanced MPLS/HVPLS capabilities in compact form factor, and per port network flexibility with either 1GE/10GE SFP+ in each port.
MPLS Cloud Services Solution
Cloud-based services pose new challenges for service providers. 

The T-Metro 8001 addresses these challenges using MPLS to provide low latency L2VPN, high availability, end-to-end service assurance using advanced OAM tools and increased scalability.

The T-Metro 8001 complements the T-Metro 8006 cloud gateway and service aggregation platform, and drives high capacity 10GE rings into the aggregation layer to support the high bandwidth required for cloud applications and mobile backhaul networks.

With it, Telco Systems offers service providers cloud-to-edge and cloud-to-cloud services end-to-end, assuring an exceptional level of experience for the end-user while optimizing carrier resources.


ETHERNET/MPLS/IP Multi 10GE Aggregation Device
Advanced Layer 2 networking allows total flexibility in deployment, provisioning, and delivery of Ethernet/MPLS/IP services. Physical and virtual networking capabilities provide automated address management and discovery, bandwidth profiles, advanced traffic classes, and complete control over how subscriber traffic is transported across a service provider’s network. Its reliable, non-blocking architecture and redundancy features ensure maximum uptime.

The T-Metro 8001 leverages Telco Systems’ field proven, carrier grade BiNOX operating system – common among all its platforms – to provide a robust and advanced multi-layer software platform to support operations, administration, and maintenance requirements. Hardware-based QoS and HQoS allows for very high QoS granularity independent of physical ports or services, while an embedded test head supports end-to-end SLA measurement and assurance. It also offers advanced OAM supporting hundreds of services with ITU-T Y.1731 SLM, RFC 2544 and Y.1564 measuring the network performance.

SDN Support
T-Metro 8001 provides full SDN support with comprehensive adoption of NETCONF, the network configuration protocol, and YANG, its data modeling language. It also support OpenFlow 1.3.1 with a simple software upgrade to ViNOX OS (ordered separately).
  • 20x1GE/10GE Ports, wire speed non-blocking 200GE switch in 1RU enclosure
  • Carrier Ethernet, MPLS & IP transport technologies
  • Full MPLS (VPWS, VPLS, HVPLS) Provider Edge (PE)
  • Layer 3 features support: HW-based L3 forwarding with VRF support using static route, OSPF, IS-IS and BGP routing protocols
  • Highly scalable solution to support large amount of services
  • Enhanced Hierarchical Quality of Service (HQoS)* and service granularity support
  • Advanced hardware based OAM
  • MEF CE 2.0, IEEE, ITU-T and IETF standards compliance for multi-vendor interoperability
  • Integrated with EdgeGenie Service Management System – simplifying full lifecycle of network deployment
  • ITU-T Y.1731 SLM support, RFC 2544 and Y.1564 network performance testing
  • Extensive service redundancy (xSTP, FRR, G.8032, G.8031, dual homing)
  • Enhanced control plane and routing features (OSPF, IS-IS, LDP, RSVP-TE)
  • Low power consumption to reduce OPEX
  • Redundant hot-swappable DC or AC power supplies & fan tray
  • Support for 19” and 23” racks
  • Support for short and long-haul optical interconnect
  • NEBS Level 3 compliant
Hardware Characteristics
20x10GE/1GE SFP+ ports, wire speed non-blocking 200GE switching
capacity in 1RU, support for short and long-haul optical interconnect

Services
E-LAN, E-Line, E-Tree and E-Access MEF services compliance, IEEE 802.1Q bridging, IEEE 802.1ad Q-in-Q (TLS), MPLS L2VPN - Full VPLS PE, MTU HVPLS, VPWS

Timing
SyncE and IEEE 1588v2* PTP

Resiliency
Sub-50ms RSVP-TE FRR, secondary LSP
ITU-T G.8032*, G.8031*, xSTP, resilient link, dual homing VPLS/HVPLS*
LAG (Static/IEEE 802.3ad LACP/Multi-chassis*)

Quality of Service
Per port/EVC/flow single/dual rate limiting
Hierarchical rate limit per port/EVC/flow
SP, WRR and hybrid frames scheduling, CoS marking and mapping per EVC

Multicast Management
IGMP v1/v2/v3*

OAM
Hardware-based IEEE 802.3ah EFM, IEEE 802.1ag CFM

Testing & Monitoring
ITU-T Y.1564 and RFC2544 test head and service performance analyzer
In-service testing capabilities, ITU-T Y.1731 PM, SM and SLM
Per port/EVC/VLAN/COS, hardware-based flexible MAC-based loopbacks

Management
Console, Telnet, SSHv2, Radius, TACACS+, SNMP v1/2/3, xFTP, NTP, DNS resolver

Security
ACLs, RADIUS, SSHv2, SNMPv3, SFTP, port security, broadcast storm prevention, secured access

General Specifications
  • Dimensions: 1.75”H (1RU) x 19”W x 20”D (44.45 x 482.6 x 508mm)
  • Weight: 12.1lbs. (5.5kg)
  • Power: Dual redundant, hot-swappable, AC/DC 100-240VAC, -48VDC (-36VDC to -60VDC), Max power consumption: 150W
  • Operating temp: 0ºC to 45ºC
  • Extended temp: -5ºC to 55ºC (up to 96 hours)
  • Humidity: Up to 95%, non-condensing
  • Fan:Load sharing, speed controlled, hot-swappable


Regulatory Compliance
European CE marking, EN 55022 Class A , CISPR 22 Class A, EN55024:1998+A1, NEBS compliant, EMC Immunity, Harmonics: EN 61000-3-2/ IEC 61000-3-2, Voltage fluctuations: EN 61000-3-3/ IEC 61000-3-3, ESD: EN 61000-4-2/ IEC 61000-4-2, RFI-AM: EN 61000-4-3/ IEC 61000-4-3, EFT: EN 61000-4-4/ IEC 61000-4-4, Surges: EN 61000-4-5/ IEC 61000-4-5, Conducted: EN 61000-4-6/ IEC 61000-4-6, Voltage DIP: EN 61000-4-11/ IEC 61000-4-11, EMC Emissions, FCC 47 CFR Part 15 Class A, ICES-003 Issue 4 Class A (Canada), EN 300386, Telcordia GR-1089 issue 4

Environmental Compliance
Full RoHS, NEBS Level 3 compliant

Safety Requirements
UL 60950, EN 60950, IEC 60950, IEC 60825-1, CSA 22.2 No. 950 , Class 1 Laser product safety (eye safety)
  • Multi-service aggregation of Carrier Ethernet networks
  • High-density business services and Carrier Ethernet network aggregator
  • Mobile backhaul Carrier Ethernet/MPLS aggregator
  • SDN networks with NETCONF and OpenFlow support
  • Cloud gateway – cloud to cloud & cloud to edge connectivity
  • Cost-optimized DSLAM, CMTS and OLTs aggregation
  • 10GE service aggregation
  • 10GE OAM collector
  • Carrier exchange, interconnect

Data Sheets
T-Metro 8001 Datasheet
A4 PDF (362.79 KB) • Letter PDF (361.29 KB) • updated: 2016-08-01
Solutions Overview
Solutions Overview
Letter PDF (1.44 MB) • updated: 2015-11-24
10GE to the Edge Solution Brochure
A4 PDF (442.88 KB) • Letter PDF (442.85 KB) • updated: 2014-05-16
Related Files
Carrier Ethernet Products Matrix
A4 PDF (260.27 KB) • Letter PDF (612.27 KB) • updated: 2015-04-20